Selling Price -
$29,700.00
3477 hours
- 2015
- New Holland Construction
- L218
- Base
- General
- Bucket hinge pin: 120 in (3048 mm) | Bottom of level bucket, fully raised: 113.3 in (2877 mm) | Clearance circle without bucket: 50.7 in (1289 mm) | Clearance circle rear: 62.9 in (1599 mm)
- Without attachment with coupler 105.7" (2697 mm)
- Dump reach (max height) 30.8 in (783 mm) | Height to top of ROPS: 77.7" (1974)
- 44.4 in (1128 mm)
- (bottom of belly pan) 7 in (178 mm)
- 36.4 in (924 mm)
- 66.1 in (1678 mm)
- Dump angle: 52° | Rollback, bucket on ground / at full height: 35°/88° | Angle of departure: 23°
- 5930 lbs (2690 kg)
- Rated operating load, 50% tip: 1800 lbs (818 kg) | Breakout force: Lift cylinder 2620 lbs (11.7 kg) / Bucket cylinder: 5550 lbs (24.7 kg) | Tipping load: 3600 lbs (1633 kg)
- ISM / N844LTA
- 3.31 x 3.94 in (84 x 100 mm)
- 3.31 x 3.94 in (84 x 100 mm)
- 135 in³ (2.2 L)
- HPCR Direct
- Turbocharged Aftercooled with external EGR
- Gross: 60 hp (45 kW) @ 2800 rpm / Net: 57 hp (42 kW) @ 2800 rpm (Per SAE J1349)
- Peak Torque 135 lb-ft (183 Nm) @ 1800 rpm
- Low Range: 7.4 mph (11.9 km/h)
- Pump flow, Standard Flow: 20.6 gpm (78 Lpm)
- 3046 psi (210 bar)
- $29,700.00
- Sauk Centre, Minnesota
- Pre-Owned
- 12031
- 2015
- New Holland Construction
- L218
- Available
- Dump reach (max height) 30.8 in (783 mm) | Height to top of ROPS: 77.7" (1974)