Back

2019 New Holland Construction Skid Steer Loaders L220

MoreLess
Limited Time Offer!

Selling Price -$38,900.00
No Images Available

Selling Price -

$38,900.00

HD Certified Pre-Owned
2269 hours
  • 2019
  • New Holland Construction
  • Skid Steer Loaders
  • L220
  • General
  • Pre-filter: spin on @ 30 microns | Main-filter: spin on @ 4 microns | Air intake: Turbocharged Aftercooled with external EGR
  • ISM | Model: N844LTA
  • Diesel 4-stroke, Turbo, D.I.
  • 4
  • 3.31 in (84 mm)
  • 3.94 in (100 mm)
  • 135 in3 (2.2 L)
  • HPCR Direct
  • #2 diesel
  • Liquid
  • High idle - no load: 2825 +/- 25 rpm | Rated - full load: 2800 rpm | Low idle: 1200 +/-50 rpm
  • per SAE J1349 Gross: 67 hp (50 kW) @ 2800 rpm | per SAE J1349 Net: 64 hp (47.7 kW) @ 2800 rpm
  • per SAE J1349 Peak: 153 lb-ft (208 Nm) @ 1800 rpm
  • Type: Spring applied, hydraulic release disc
  • 12" x 16.5" Heavy Duty (70 OTW)
  • 12" x 16.5" Heavy Duty (70 OTW)
  • Lift cylinder: 3450 lbs (15.3 kN) Tip Limit | Bucket cylinder: 7300 lbs (32.5 kN) | Cycle time Raise: 3.5 sec | Cycle time Lower: 2.3 sec | Cycle time Dump: 2.6 sec | Cycle time Roll back: 2.0 sec
  • Low range: 7.8 mph (12.5 km/h)
  • Gear
  • Drive pump mechanical: 25.1 gpm (95 Lpm) | Drive pump electro hydraulic: 25.1 gpm (95 Lpm) | Pump: 20.6 gpm (78 Lpm)
  • Relief: 3046 psi (210 bar)
  • Angle of departure: 25° | Dump angle: 52°
  • Bucket hinge pin: 121 in (3073 mm) | Dump Reach Max.: 29.8 in (758 mm)
  • 44.4 in (1128 mm)
  • 8 in (203 mm)
  • 69.1 in (1755 mm)
  • Tread: 56.9 in (1448 mm)
  • 19.5 gal (73.8 L)
  • 7.5 qt (7.1 L)
  • Chain (per side): 7.9 qt (7.4 L)
  • System with filter: 34 qt (32.2 L)
  • Rated operating load 50% tip: 2000 lbs (905 kg) | Tipping load: 4000 lbs (1814 kg)
  • 6470 lbs (2930 kg)
  • 6170 lbs (2795 kg)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $38,900.00
  • Sauk Centre, Minnesota
  • Pre-Owned
  • 13659
  • 2019
  • New Holland Construction
  • Skid Steer Loaders L220
  • Pre-filter: spin on @ 30 microns | Main-filter: spin on @ 4 microns | Air intake: Turbocharged Aftercooled with external EGR
  • #2 diesel
  • Available
  • Tread: 56.9 in (1448 mm)
  • Bucket hinge pin: 121 in (3073 mm) | Dump Reach Max.: 29.8 in (758 mm)

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.